iPad Mini 4/5 Cooling Case 2026 (Plug-in Version)

Introduction

Your Wombat Ware Cooling Case can cool down your iPad  when it is warm (above 40 degrees celsius) and bring down its temperature by 5 - 10 degrees celsius, potentially preventing it from overheating and shutting down when it gets above 45 degrees celsius. 

Features

• Light & Portable : the case provides some amount of bump/drop protection to your iPad especially at the corners 
• Effective Cooling : 2 x slim blower fans that creates an airflow at the back of your iPad 
• Cooling when needed : when plugged in, the built-in temperature sensor will monitor the temperature and turn on the blower fans 
• Stress Free for hours : powered directly by a USB-C cable (5V 1A/2A source) 
• Usability : the mounting holes at the back are compatible with mounting accessories that rely on the 4-hole AMPS pattern. 
• Upgradable : the cooling body can be removed from the iPad Mini 4/5 Cover and fitted to the iPad Mini 6 Cover or a future Mini Cover.

Specifications

Safety Instructions

• Please read and follow the instructions in this document
• Keep the product away from heat sources such as fires, flammable or explosive gas etc.
• This product is not water-proof. Do not immerse it in water, or expose it to water, it will damage the electronics.
• Only charge it with a power adapter with a 5V 1A/2A output (no fast-chargers)

What’s in the box

1. The iPad Cooling Case 
2. A USB-C to USB-A cable for charging
3. 4 x M4 nuts 
4. 4 x M4 x 12mm screws for compatible mounting options

Putting the iPad into the iPad Case

Slide the iPad into the iPad Case from the front using the longer edge. Then push each of the four corners of the iPad into the iPad Case. The iPad Case should snap onto the iPad as you push in on each corner. Ensure that the four edges of the iPad Case are holding down the iPad nicely.

Powering the Cooling Case

This version does not include a rechargeable battery. Simply connect the USB-C cable to the Cooling Case, and ensure the other end (USB-A) is plugged into a 5V & 1A/2A output.

Using the Cooling Case

Once the USB-C cable is plugged in and power is supplied, the fans will come on for 1 second. This shows that the fans are working. Following that, the built in temperature sensor will monitor the temperature within. When it gets too warm (over 32⁰C or 90⁰F), the fans will turn on.

Warranty 

Wombat Ware warrants this product against defects in materials and/or workmanship under normal use for a period of one year from the date of purchase by the original purchaser. Please retain the tax invoice as evidence of purchase.

Compliance Info

The Wombat Ware Cooling Case has passed EMC compliance tests and complies with the applicable requirements of FCC Rule Part 15 as well as the rules for the Regulatory Compliance Mark (RCM).

For more information, go to our support/faq page or check out our video tutorials on YouTube.